Pleated blinds offer an attractive alternative to Venetian or roller blinds, and they're just as simple to install as any other type. Follow the instructions below and you'll have your pleated blind installed in no time.
What you need
• Your blind, carefully unpacked
• Appropriate screws and fittings
• A drill, though not needed in all cases
• A metal tape measure
• A sturdy step-ladder
Top or face fix?
You can chose to fix vertical blinds on the ceiling or lintel (top fix), or onto the wall or window frame (face fix). Whichever fitting you decide upon, make sure you have the appropriate fittings for the surface. We supply wood screws with your blind, but if you're fixing the brackets onto anything else such as cement, brick or plaster, you'll need to make sure you pick up the right fittings from your local DIY store.
What to Do
Fitting free-hanging pleated blinds
Download our pleated freehanging fitting guide here.
Fitting 20mm tensioned pleated blinds
Follow step one and two as above.
Step three: Finalise wire tensioning
Once your blind is hanging in your brackets, you can adjust the tension of your pleated blind. Firstly, locate your wire stretcher, an angle screwdriver and the end of the wire. Secure the end of the wire with your hand or with a pair of pliers, and release the screw slightly by turning the angle screwdriver anti-clockwise.
Next, tension the wire that's in your hand or pliers, and tighten the screw once you're happy with the wire's tension. If you need more tension, carefully continue to tighten the wire stretcher. If you've got a pleated blind with more than one wire, do step three for all of them, ensuring even tension across all of them.
It's vitally important that you install the supplied safety features, namely a chain or cord safety device, as this can help prevent the risk of strangulation.
If you have questions about your fitting , why not give us a call and speak to one of our friendly Customer Services Advisors on 03702187042